New Products
 Products
Radiation Therapy
    The Alderson Radiation
    Therapy Phantom
    The Treatment Brassiere
    Phantoms for Linac
    Radiosurgery and the
    Gamma Knife
    Dynamic Anatomical
    Respiring Humanoid
    Phantom
Radiology
    Anthropomorphic Phantoms
    Wounded Willy and
    Damaged Debbie
Angiographic
    Head Phantoms
    Lung/Chest Phantoms
    Computed Tomography
    Head Phantoms
Nuclear Medicine
    Anthropomorphic Phantoms
    for Nuclear Medicine
    Heart/Thorax for Cardiac
    SPECT/PET and
    Mammoscintigraphy
    Striatal Phantoms
    for Cardiac SPECT/PET
Health Physics
    The Lawrence Livermore
    Realistic Phantom
    The Fission-Product
    Phantom
Pain Management
    Kohrman Injection
    Phantom
 About
 Contact
 Email
 Home
  • 3-dimensional high-contrast vascular pattern
  • Full or half-head
  • Tissue equivalent materials
  • Step wedge and resolution test patterns
  • Opaque or transparent
Alderson ANGIOGRAPHIC HEAD PHANTOMS bridge the gap between physical and anatomical information requirements. Molded in tissue equivalent material, an accurate male skull contains a 3-dimensional, high-contrast vascular simulation to facilitate correlation of the radiologist’s subjective evaluation of angiographic image quality with actual measurements of resolution and contrast under the same exposure conditions.

Each ANGIOGRAPHIC HEAD PHANTOM contains a 5-step wedge. A 2-10 line pair/mm test pattern is optional. Other patterns or test objects and custom pathologies are available on special order.

The ANGIOGRAPHIC HEAD PHANTOM provides a “dry run” to completely check out angiographic equipment and ensure that is operating satisfactorily in all significant details before subjecting patients to radiological procedures. If the imaging system malfunctions, the phantom also plays a critically important role in isolating and verifying correction of the problems. The ANGIOGRAPHIC HEAD PHANTOM confines the variables to components and technique and is an invaluable service and teaching tool.

Unique RSD soft-tissue equivalent material is used for the skin tissue and neck and is adjusted to brain density in the cranium. This material closely duplicates brain tissues in radio-absorptive and scatter properties. The phantom is virtually shatterproof.

A high contrast 3-dimensional vascular pattern is placed in the median plane. The pattern closely resembles an internal carotid arteriogram in its early phase. The radio-density of the angiographic pattern has been adjusted to represent a 75% contrast-media. The phantom can be used omnidirectionally.

The ANGIOGRAPHIC HEAD PHANTOM is available as either a full or half head. The full head has the advantage of representing the full scatter properties and subject contrast of a human head. The half-head model is well suited to non-grid techniques. It has the advantages of lighter weight, lower cost and smaller size, easily fitting into a briefcase.

The combination of the simulated vascular pattern, resolution chart, and stepwedge enables the user to correlate physical parameters (such as resolution, contrast and speed) with the subjective evaluation of the skull markings and the vascular detail.

The ANGIOGRAPHIC HEAD PHANTOM is available in either transparent or opaque models.



back to top
 
 
© copyright  2008  RSD Radiology Support Devices